MIT

ramazani

Talks

Invited Lectures/Talks

  1. “Computational Materials Design and Discoevry for band gap engineering at Multiple-Scales”, Sandia National Laboratories, Livermore, CA, August 31, 2022.
  2. “Multi-scale computational materials design for band gap engineering”, Colloquium Material Modelling, University of Stuttgart, Germany, November 4, 2021.
  3. “Multi-scale computational materials design for band gap engineering”, 8th International Conference on Nanostructures (ICNS8), Online, November 18–19, 2020.
  4. “Computational analysis of protein corona composition in biological nanoparticle–protein interactions”, IEEE 1st International Workshop on Wearable Sensors and Devices, Artificial Intelligence and Wearables Markets (WSAIM), Online, November 18–19, 2020.
  5. “Exciton-surface plasmon polariton coupling and hot carriers generation in 2D semiconductors”, Nanotechnology Virtual 2020, Online, July 15–16, 2020.
  6. “Development and Application of a Microstructure-based Approach to Characterize and Model Failure Initiation in Dual- phase Steels”, 5th World Congress on Integrated Computational Materials Engineering (ICME 2019), Indianapolis, Indiana, USA, July 21–25, 2019. 
  7. “Multiscale modeling of mechanical properties of thin films for solar cell applications”, International Conference on Plasticity, Damage, and Fracture 2019, Panama City, Panama, Jan. 3—9, 2019.
  8. “3D nanophotonic metamaterials”, Interdisciplinary Centre for Advanced Materials Simulation (ICAMS), Ruhr University of Buchum, Germany, Nov. 22, 2018.
  9. “Mutiscale modeling of mechanical properties of Al-Li alloy”, 1st International Symposium on Light Alloys and Composite Materials, Karabük, Turkey, March 22-24, 2018.
  10. “Multiscale modeling of deformation response of Al-Li Alloy during Uniaxial Compression Test”, Inter-national Conference on Plasticity, Damage, and Fracture 2018, San Juan, Puerto Rico, Jan. 3—9, 2018.
  11. “Multiscale modeling of bakes hardening effect on the mechanical behavior of DP steels”, MSE 2016, Darmstadt, Germany, Sept. 27–29, 2016.
  12. “Modeling the lipoprotein corona formation around inorganic nanoparticles as a function of their hy-drophobicity using coarse grained molecular dynamics simulation”, Amirkabir University of Technology, Tehran, Iran, Aug. 28, 2016.
  13. “Failure initiation mechanisms in complex microstructures: interface decohision versus martensite crack-ing”, Sitzung des DGM Arbeitskreis Mikrostrukturmechanik, Karlsuhe Institute of Technology (KIT), Germany, Oct. 19, 2015.
  14. “Microstructure based failure model DP steels”, Materials Mechanics Seminar, TU Stuttgart, Stuttgart, Germany, May 13, 2013.
  15. “Characterization of microstructure and modelling the flow curve behaviour of bainite aided DP steel”, Sitzung des DGM Arbeitskreis Mikrostrukturmechanik, Geesthacht, Germany, Feb. 4, 2013.
  16. “Correlation between 2D and 3D RVE modelling of flow curve in DP steels using a microsQuantum Espresso, Materials Studio,tructure-based RVE approach”, Amirkabir University of Technology, Tehran, Iran, Jan. 19, 2013.
  17. “Microstructure based failure model DP steels using XFEM”, Amirkabir University of Technology, Tehran, Iran, Jan. 19, 2013.
  18. “Correlation between 2D and 3D RVE modelling of flow curve in DP steels using a microstructure-based RVE approach”, Materials Modelling Colloquium, TU Stuttgart, Stuttgart, Germany, April 19, 2012.
  19. “Correlation between 2D and 3D RVE modelling of flow curve in DP steels”, Gesellschaft fur Materi-alkundeh (DGM) Workshop, Siegen, Germany, March 9, 2012.
  20. “Incorporating transformation induced GND effect into microstructure based flow curve prediction of DP steels”, M2i Annual Conference, Noordwijkerhout, The Nederland’s, Dec. 12, 2011.
  21. “Incorporating transformation induced GND effect into microstructure based flow curve prediction of DP steels”, Deutsche Gesellschaft fur Materialkundeh (DGM) Workshop, Braunschweig, Germany, Sept. 30, 2011.

Talks & Posters

  1. A. Ramazani, E. Popczun, S. Natesakhawat, J. Lekse, Y. Duan, “Deep Learning Method to Accelerate Discovery of Effective Doping in Sr1-xRxFe1-yMyO3−δ Oxygen Carriers for Chemical Looping Air Separation”, APS March Meeting 2022, Chicago, Illinois, USA, March 14–18, 2022.
  2. S. Yalameha, Z. Nourbakhsh, A. Ramazani, D Vashaee, “Topological phase and thermoelectric properties of bialkali bismuthide compounds (Na, K)2RbBi from first-principles”, APS March Meeting 2022, Chicago, Illinois, USA, March 14–18, 2022.
  3. S. Yalameha, Z. Nourbakhsh, A. Ramazani, D Vashaee, “Prediction and control of the topological phases in Cs(Na, K)2Bi compound using strain-engineering”, APS March Meeting 2022, Chicago, Illinois, USA, March 14–18, 2022.
  4. S. Yalameha, Z. Nourbakhsh, A. Ramazani, D Vashaee, “Prediction of mechanical and anisotropic elastic properties of Cs(Na, K)2Bi compounds under hydrostatic tension and compression and tunable auxetic properties”, APS March Meeting 2022, Chicago, Illinois, USA, March 14–18, 2022.
  5. H. Du, E. Virot, A. Ramazani, L. Wang, S. Kharchenko, M.A. Rahman, S.M. Rubinstein, D.A. Weitz, N. Fang, “Intersonic Detachment surface waves in rubber frictional sliding”, Virtual Technical Meeting of the Society of Engineering Science 2020, September 29–October 1, 2020.
  6. A. Ramazani, V. Sundararaghavan, N. Fang, “First principles study of electron transport through diarythylene-transition metal dichalcogenide molecular switch”, APS 2019, Boston, Massachusetts, USA, March 4–8, 2019. 
  7. A. Ramazani, M. Faghihnasiri, H. Jafari, R. Larson, “DFT study of high order elastic constants and electronic properties of borophene”, TMS 2019, San Antonio, Texas, USA, March 10–14, 2019.
  8. A. Ramazani, J. Kundin, C. Haase, U. Prahl, “Phase-field modeling of microstructure evolution of binary and multicomponent alloys during selective laser melting (SLM) process”, TMS 2019, San Antonio, Texas, USA, March 10–14, 2019.
  9. G. Romano, J.R. Harter, A. Ramazani, A. Kolpak, T.S. Palmer, P.A. Greaney, “Phonon scattering due to material property gradients”, 2018 MRS Spring Meeting & Exhibit, Phoenix, Arizona, USA, April 2–6, 2018.
  10. A. Ramazani, V. Sudararaghavan, “Multiscale modeling of deformation response of Polycrystalline Alloys using orientation distribution functions”, ICME 2017, Ypsilanti, MI, USA, May 21-25, 2017.
  11. A. Ramazani, “Development and application of a microstructure based approach to characterize and model the failure initiation in DP steels”, ICME 2017, Ypsilanti, MI, USA, May 21–25, 2017.
  12. A. Ramazani, V. Sudararaghavan, “Crystal plasticity simulation of Aluminum Lithium alloy: Verification and Experiments”, 2017 MRS Spring Meeting & Exhibit, Phoenix, Arizona, USA, April 17-21, 2017. 
  13.  A. Ramazani, A. Soleimani, A. Reihani, V. Sudararaghavan, R. Larson, “The effect of nanotube length and temperature on phonon transport and thermal conductivity of graphyne nanotubes”, 2017 MRS Spring Meeting & Exhibit, Phoenix, Arizona, USA, April 17-21, 2017.
  14. A. Ramazani, V. Sudararaghavan, “Crystal plasticity simulation of Aluminum Lithium alloy: Verification and Experiments”, 2016 MRS Spring Meeting & Exhibit, Phoenix, Arizona, USA, March 28-April 1, 2016.
  15. G. Moeini, A. Ramazani, R. Larson, G. Koenke, “Micromechanical modeling of fatigue behavior of DP steels”, MSE 2016, Darmstadt, Germany, September 27-29, 2016. 
  16. A. Ramazani, T. Mandal, R. Larson, “Modeling the hydrophobicity of inorganic nanoparticles using coarse grained molecular dynamics simulations”, 2016 MRS Spring Meeting & Exhibit, Phoenix, Arizona, USA, March 28-April 1, 2016. 
  17. A. Gheisarian, M. Abbasi, M. Zahedifar, M. Rezaei, A. Ramazani, The effect of aging treatment on microstructure, mechanical properties and corrosion resistance of Ti-6Al-4V alloy, iMAT 2015, Tehran, Iran, Nov. 9-10, 2015.
  18. L. Aagesen, A. Ramazani, J. Kim, P. Braun, K. Thornton, “Phase-Field Simulations of Eutectic Alloy Solidification into Templates for Photonic Metamaterials”, 13th U.S. National Congress on Computational Mechanics (USNCCM13), San Diego, CA, USA, July 26-30, 2015.
  19. A. Ramazani, V. Tomeckova, L. Aagesen, D. Lee, J. Halloran, K. Thornton “The Effect of Template Geometry on the Eutectic Growth of Directionally Solidified Binary Organic Metamaterials: A Phase-Field Study”, TMS 2015, Orlando, FL, USA, March 15-19 2015.
  20. A. Ramazani, L. Aagesen, J. Kim, P. Braun, K. Thornton, Phase- field modeling of eutectic growth by directional solidification for nanophotonic metamaterials, MS&T 2014, Pittsburg, PA, USA, Oct. 12-16, 2014.
  21. A. Ramazani, U. Prahl, A. Schwedt, A. Aretz, “Quantification of the effect of transformation-induced geometrically necessary dislocations on the flow-curve modelling of dual-phase steels”, MS&T 2014, Pittsburg, PA, USA, Oct. 12-16, 2014.
  22. A. Ramazani, N. Arsalani, V. Shirazi Khanamiri, “Development and characterization of Graphene-Polyaniline (GNS/PANI) Nanocomposite for conductive inks applications”, MS&T 2014, Pittsburg, PA, USA, Oct. 12-16, 2014.
  23. A. Ramazani, S. Bruehl, U. Prahl, W. Bleck, “Bake-Hardening effects in dual-phase steel”, 23rd International Workshop on Computational Mechanics of Materials (IWCMM 2013), Singapore, Oct. 2-4, 2013.
  24. A. Ramazani, M. Eftekhari, U. Prahl, S. Schmauder, “Study the mechanical properties of graphyne nanoribbon using molecular dynamics”, 23rd International Workshop on Computational Mechanics of Materials (IWCMM 2013), Singapore, Oct. 2-4, 2013.
  25. K.C. Komerla, A. Ramazani, U. Prahl, W. Bleck, “Comparison of crystal plasticity finite element method and J2 plasticity approach in predicting failure initiation of DP steels”, 23rd International Workshop on Computational Mechanics of Materials (IWCMM 2013), Singapore, Oct. 2-4, 2013.
  26. U. Prahl, A. Ramazani, “Modelling the process chain of cold rolled dual phase steel for automotive application”, 2nd World Congress on Integrated Computational Materials Engineering (ICME 2013), Salt Lake City, UT, USA, July 7th -11th, 2013.
  27. U. Prahl, H. Quade, A. Ramazani, W. Bleck, “Influence of microstructural banding on flow curve and failure in TRIP steels”, MEFORM 2013 – Simulation von Umformprozessen, Tagungsband, Freiberg, March 20-22, 2013.
  28. A. Ramazani, U. Prahl, W. Bleck, P. Pinard, A. Schwedt, A. Aretz, “Microstructure based failure model DP steels using XFEM”, Local Mechanical Properties 2012 (LMP 2012), Levoča, Slovakia, Nov. 7-9, 2012.
  29. A. Ramazani, A. Schwedt, A. Aretz, M. Spaehn, U. Prahl, “Failure initiation in DP steels – Part 1: Microstructure based modelling and model parameter identification for DP600”, 22nd International Workshop on Computational Mechanics of Materials (IWCMM 2012), Sep. 24-26, 2012.
  30. A. Ramazani, A. Schwedt, A. Aretz, M. Spaehn, U. Prahl, “Failure initiation in DP steels – Part 2: Application and generalization on different DP steel grades”, 22nd International Workshop on Computational Mechanics of Materials (IWCMM 2012), Sep. 24-26, 2012.
  31. P. Pinard, A. Schwedt, A. Ramazani, U. Prahl, S. Richter, “Better identification of dual phase steel constituents by combined EBSD and high resolution EPMA carbon measurements”, Microscopy and Microanalysis conference 2012 (M&M 2012), Phoenix, AZ, USA, July 30 – Aug. 2, 2012.
  32. P. Pinard, A. Schwedt, A. Ramazani, P. Suwanpinij, U. Prahl, S. Richter, “Identification of steel phases and constituents by combined EBSD and high resolution EPMA carbon measurements”, European Microbeam Analysis Society Workshop 2012 (EMAS 2012), Padua, Italy, Jun.17th-20th 2012.
  33. P . Pinard, A. Schwedt, A. Ramazani, H. Quade, P . Suwanpinij, U. Prahl, S. Richter, “Bainite identification by combined EBSD and EPMA measurements”, Royal Microscopy Society EBSD 2012, NPL, London, England, March 26-28, 2012.
  34. A. Ramazani, M. Abbasi, U. Prahl, W. Bleck, “Damage prediction in the cross die test of multiphase steels using GTN model and FLC criterion”, the 21st International Workshop on Computational Mechanics of Materials (IWCMM21), Limerick, Ireland, Aug. 22-24, 2011.
  35. A. Ramazani, K. Mukherjee, U. Prahl, W. Bleck, “Modelling the effect of microstructural banding on the work hardening behaviour of dual-phase (DP) steels”, 20th International Workshop on Computational Mechanics of Materials (IWCMM20), Loughborough, England , Sep. 8-10, 2010.
  36. B. Gholamzadeh, F. Halimi, H. Halimi, A. Ramazani, “An Experimental and Numerical Study on the Formality of Al 5083 Alloy in Uniaxial Compression Test”, the 11th Iranian Conference on manufacturing Engineering (ICME 2010), Tabriz, Iran, Oct. 15-18 2010.
  37. A. Ramazani, R. Mahmudi, “Barreling of Leaded Bronze in Uniaxial Cold Upsetting”, 3rd Conference of Metals and Materials Deformation, MATFORM’85, Tehran, Iran, May. 8-10, 2006.
  38. A. Ramazani, M. H. Parsa, R. Mahmudi, “Strain Instability of Aluminum and Brass in Cold Upsetting”, 9th Annual Congress of Iranian Society of Metallurgy Engineers, Shiraz, Iran, Oct. 15-18, 2005.